Medindia
Take charge of your health! Click Here
Medindia » Research News

The Next Generation Of Bacterial Contamination Detection In Milk Cartons: Smart Caps

by Anisha Illaon July 22, 2015 at 4:43 AM

"Smart caps", the latest innovation in 3D printing now allows consumers to check whether their milk in cartons with the 3D printed caps is fresh.


The 3D printed cap for a milk carton, which has wireless electronic sensors embedded in it, can detect signs of spoilage in the milk. The new technology is a step in the direction when you can check your food using your smartphone, researchers said.

The findings were described in a new open-access journal Microsystems & Nanoengineering from the Nature Publishing Group. "Our paper describes the first demonstration of 3D printing for working basic electrical components, as well as a working wireless sensor," said senior author professor Liwei Lin, from the University of California Berkeley. "You could imagine a scenario where you can use your mobile phone to check the freshness of food while it's still on the store shelves," he added.

The researchers integrated the electronic components into a plastic milk carton cap to monitor signs of spoilage. The "smart cap" was fitted with a capacitor and an inductor to form a resonant circuit. A quick flip of the carton allowed a bit of milk to get trapped in the cap's capacitor gap, and the entire carton was then left unopened at room temperature for 36 hours.

The circuit could detect the changes in electrical signals that accompany increased levels of bacteria. The researchers periodically monitored the changes with a wireless radio-frequency probe at the start of the experiment and every 12 hours thereafter, up to 36 hours. The property of milk changes gradually as it degrades, leading to variations in its electrical characteristics. Those changes were detected wirelessly using the smart cap, which found that the peak vibration frequency of the room temperature milk dropped by 4.3% after 36 hours.

In comparison, a carton of milk kept in refrigeration saw a relatively minor 0.12% shift in frequency over the same time period. "This 3D-printing technology could eventually make electronic circuits cheap enough to be added to packaging to provide food safety alerts for consumers," Lin said.

Source: IANS

View Non AMP Site | Back to top ↑