Revolutionizing Neurosurgery Training: 3D-Printed Silicone Replicas of Brain Blood Vessels

Researchers have developed a 3D-printing process using silicone, called AMULIT, which can create accurate replicas of blood veins in the brain for neurosurgery training.

Highlights:

3D printing with silicone can create realistic replicas of blood veins in the brain for neurosurgeon training
Existing training models do not accurately simulate real blood arteries and lack critical structural details
Researchers developed an embedded 3D printing approach to trap soft materials like silicone in three-dimensional space until the printed object solidifies, overcoming interfacial tension issues. This method can potentially lead to the development of advanced silicone-based technologies in the healthcare industry

A novel 3D-printing process utilizing silicone can create exact replicas of the blood veins in your brain, allowing neurosurgeons to train with more realistic simulations before operating.

Many neurosurgeons practice each surgery before entering the operating room, using models of the patient's brain. Yet, the existing training models used by neurosurgeons do not accurately simulate real blood arteries. They provide inaccurate tactile feedback, miss minute but critical structural details, and frequently exclude entire anatomical components that govern how each surgery is conducted. Pre-surgery simulations using realistic and individualized representations of patient brains could reduce errors in actual surgical procedures.

3D Printing in the Pharmaceutical Industry: Technology and Future
3D printing technology of medicines in the pharmaceutical industry is an advanced drug delivery system that uses computer-aided designs to create personalized drugs.

‘Researchers have developed a new 3D printing process using silicone to create precise replicas of blood veins in the brain, allowing neurosurgeons to train more accurately before operating.’

Creating Brain Blood Vessel Replicas: A Revolutionary 3D-Printing Process using Silicone

3D printing, on the other hand, has the potential to create replicas with the soft feel and structural correctness that surgeons require.

3D printing is commonly seen as a method that entails laying down layer after layer of molten plastic, which solidifies as a self-supporting structure is constructed. However, many soft materials do not melt and re-solidify in the same manner that the plastic filament used in 3D printers does. With soft materials like silicone, users only get one shot - they must be printed in a liquid condition and then irreversibly solidified.

FRESH 3D Printing of Human Heart - A Step Closer to Reality
Novel 3D bioprinting of the human heart may soon be possible using a new technology called Freeform Reversible Embedding of Suspended Hydrogels (FRESH), which can construct bio-scaffolds using collagen. This can be scaled up to build a full-sized, functional, adult human heart.

Embedded 3D Printing: A Comprehensive Approach to Creating Complex Soft Structures

How can you create a sophisticated 3D structure out of a liquid without creating a puddle or a sagging blob?

For this objective, researchers devised a comprehensive approach known as embedded 3D printing. The "ink" is deposited inside a bath of a second supporting substance designed to flow around the printing nozzle and retain the ink just after the nozzle moves away in this approach. This enables users to make complicated structures out of liquids by trapping them in three-dimensional space until the printed object is solidified. Embedded 3D printing has proven useful for constructing a wide range of soft materials, including hydrogels, microparticles, and even living cells.

Unfortunately, printing with silicone has proven difficult. While most support materials are water-based, liquid silicone is an oil. Oil and water have a high interfacial tension, which is what causes oil droplets to take on circular forms in water. This force causes 3D-printed silicone structures to distort, even when supported by a support medium.

Worse, as they are printed, these interfacial forces cause small-diameter silicone features to shatter into droplets. A lot of research has gone into developing silicone materials that can be printed without support, but these drastic changes also change the attributes that consumers care about, such as how soft and elastic the silicone is.

3D Printing Restores Burnt Nose of Teenager
The burnt nose of a teenager is restored using 3D printing technique, which is a boon for burn victims and people looking for nose jobs.

AMULIT 3D Printing Silicone: Breaking the Interfacial Tension Barrier

As researchers at the intersection of soft matter physics, mechanical engineering, and materials science, we decided to solve the problem of interfacial tension by designing a silicone oil support material.

We reasoned that most silicone inks would be chemically similar to our silicone support material, reducing interfacial tension significantly, but also different enough to stay distinct when combined for 3D printing. We developed several possible support materials before deciding on a dense emulsion of silicone oil and water. Consider it like crystal transparent mayonnaise, formed from packed microdroplets of water in a silicone oil continuity. AMULIT stands for additive manufacturing at ultra-low interfacial tension.

We were able to print off-the-shelf silicone at high resolution using our AMULIT support medium, making features as small as 8 micrometers (approximately 0.0003 inches) in diameter. The printed structures are just as elastic and robust as their molded counterparts.

We were able to 3D-print accurate models of a patient's cerebral blood arteries based on a 3D scan, as well as a functioning heart valve model based on average human anatomy, thanks to these capabilities.

Organ Bioprinting for Transplantation Could Soon be Possible
Organ bioprinting technology is now available that can print replacement organs for transplantation. Hence, the new 3D printing technique can be used to create intricate structures that resemble actual living tissues.

Transforming Healthcare with 3D-Printed Patient-Specific Mimics of Physiological Structures

Silicone is used in a wide range of products, from daily consumer goods like cookware and toys to cutting-edge technologies in the electronics, aerospace, and healthcare industries.

Typically, silicone items are created by pouring or injecting liquid silicone into a mold and extracting the cast once it has solidified. Because of the cost and difficulty of producing high-precision molds, producers are limited to goods with a few preset sizes, forms, and patterns. Removing delicate silicone structures from molds without causing damage is another hurdle, and manufacturing faults rise when molding highly sophisticated structures.

Addressing these obstacles could pave the way for the development of advanced silicone-based technologies in the healthcare business, such as tailored implants or patient-specific mimics of physiological structures, which could transform care.

Source-Medindia