Immediate Blood Flow Control: Innovations in Heart Valve Implantation

Researchers have developed a cost-effective method, called "Focused Rotary Jet Spinning," to produce functional heart valves within minutes for immediate implantation, which aids in effectively controlling blood flow for an hour (1^✔ ✔Trusted Source
On-demand heart valve manufacturing using focused rotary jet spinning

Go to source). The initial implementation of the method was performed in sheep, where the scientists likened their approach to "a cotton-candy machine with a hair dryer behind it."

Although further long-term in vivo studies are required to assess the endurance of the valves, they successfully regulated blood flow in sheep for an hour. The prototype will be featured in the June issue of the journal Matter.

Advertisement

Advancements in Heart Valve Implants

“The two big advantages of our method are speed and spatial fidelity,” says bioengineer Michael Peters of Harvard University, one of the study’s first authors. “We can create really small fibers—on the nanoscale—that mimic the extracellular matrix that heart valve cells are used to living and growing inside, and we can spin full valves in a matter of minutes, in contrast to currently available technologies that can take weeks or months to make.”

Pulmonary heart valves are made up of three partially overlapping leaflets that open and close with every heartbeat. They’re responsible for controlling one-way blood flow through the heart; with every beat, they open fully to allow blood to flow forwards, and then close fully to prevent blood from flowing backward.

To make the valves, the researchers use air jets to direct liquid polymer onto a valve-shaped frame, resulting in a seamless meshwork of tiny fibers.

The valves are designed to be temporary and regenerative: they provide a porous scaffold for cells to infiltrate, build upon, and eventually replace as the polymer biodegrades.

Advertisement

From Minutes to Functionality

“Cells operate at the nanometer scale, and 3D printing can't reach down to that level, but focused rotary jet spinning can put nanometer-scale spatial cues in there so that when cells crawl up into that scaffold, they feel like they're in a heart valve, not a synthetic scaffold,” says senior author and bioengineer Kit Parker of Harvard University. “There's a certain trickery that's involved.”

The team tested the valves’ strength, elasticity, and ability to repeatedly open and close using a pulse duplicator, a machine that simulates the heartbeat.

“A normal heart valve functions for billions of cycles throughout one's life, so they’re constantly being pulled and stretched and stimulated,” says Peters. “They need to be very elastic and retain their shape despite these mechanical stimuli, and they also have to be strong enough to withstand the back pressures from blood trying to flow backward.”

They also grew heart cells on the valves to test for biocompatibility and to see how well cells could infiltrate the scaffolds.

Advertisement

The 'Cotton-Candy' Method

“Valves are in direct contact with blood, so we need to check that the material doesn't cause any thrombosis or obstruction of the blood vessels,” says biophysicist Sarah Motta, the study’s other first author, who works at Harvard University and the University of Zurich.

Finally, the researchers tested the valves’ immediate functionality in sheep, who are a good animal model for several reasons—the physical forces inside sheep and human hearts are similar, and sheep hearts also represent an “extreme” environment for heart valves due to sheep’s accelerated calcium metabolism, which presents an increased risk of developing calcium deposits, a common complication for heart valve recipients.

Surgeons implanted the valves into two sheep and monitored their position and function using ultrasound for one hour. Both valves implanted successfully and were immediately functional, but one sheep’s valve dislodged after a few minutes—the researchers think this occurred because it was the incorrect size for the animal.

Rapid Heart Valve Production and Control

In the second sheep, the valve showed good functionality for an hour, and post-mortem analysis indicated that there were no complications in terms of tears or thrombus formation and that cells had already begun to infiltrate and adhere to the valve.

Next, the team plan to test the valves’ performance over a longer duration and in more sheep.

“We want to see how well our valves function over the scale of weeks to months, and how effectively and quickly the sheep's cells and tissues are actually remodeling the scaffold,” says Peters.

“It's a long slog to develop something that's going to go into a human patient, and it should be long,” says Parker. “You have to do a lot of animals before you put something into a human.”

Reference:

1. On-demand heart valve manufacturing using focused rotary jet spinning - (https://www.cell.com/matter/fulltext/S2590-2385(23)00243-6?)

Source-Eurekalert